FANDOM


Steris system 1e

Steris system 1e

About

A Liquid/Chemical Sterilizer is an automated, tabletop, microcomputer-controlled device which maintains the process parameters necessary to ensure standardized and effective liquid chemical sterilization. The device is an immersible, heat-sensitive machine used to clean scopes (e.g. endoscopes, sigmoidoscopes, etc). The use dilution fills the chamber and is typically heated to 115 - 131°F (46 - 55°C) for liquid chemical sterilization. The device operates on 115 VAC, 60 Hz, 15 amp power circuits. [1]

It uses a sterilant concentrate which is a powerful liquid chemical sterilant used to eliminate all microbial life. The whole process takes approximately a 23-minutes to complete one cycle.

Maintenance Data

Listed are recommended maintenance cycles that can be loaded within local computerized maintenance management systems. These cycles can also be used to estimate average monthly cycle inspections, PMs, and calibrations with average technician hours. Disclaimer: It is recommended to consult OEM cycles.

Maintenance cycles (in months) with estimated technician hours (in minutes)
Months Minute(s) Risk Level Item
Safety Inspection (INSP) 12 15 Moderate
Preventive Maintenance (PM) 6 60 N/A
Calibration (CAL) 6 30 N/A
Schedule Parts Replacement (SPR) 6 60 N/A Solenoids,
Valves
Acceptance Inspection (AI) 0 120 N/A



Manufacturers

Models

System 1 e

Second Source Parts

Second Source Service

References

  1. Steris Corp. "SYSTEM 1E™ LIQUID CHEMICAL STERILANT PROCESSING SYSTEM". 2010. [1]


Links

Steris System 1 Update

See also

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.