FANDOM


Incubator, Laboratory

Incubator, Laboratory

About

An Incubator, Laboratory is a device used to grow and maintain microbiological cultures or cell cultures in a hospital laboratory. The incubator maintains optimal temperature, humidity and other conditions such as the carbon dioxide(CO2) and oxygen content of the atmosphere inside. Incubators are essential for a lot of experimental work in cell biology, microbiology and molecular biology and are used to culture both bacterial as well as eukaryotic cells.

The simplest incubators are insulated boxes with an adjustable heater, typically going up to 60 to 65 °C (140 to 150 °F), though some can go slightly higher (generally to no more than 100 °C). The most commonly used temperature both for bacteria such as the frequently used E. Coli as well as for mammalian cells is approximately 37 °C, as these organisms grow well under such conditions. For other organisms used in biological experiments, such as the budding yeast Saccharomyces cerevisiae, a growth temperature of 30 °C is optimal.

More elaborate incubators can also include the ability to lower the temperature (via refrigeration), or the ability to control humidity or CO2 levels. This is important in the cultivation of mammalian cells, where the relative humidity is typically >95% and a slightly acidic pH is achieved by maintaining a CO2 level of 5%.

Most incubators include a timer; some can also be programmed to cycle through different temperatures, humidity levels, etc. Incubators can vary in size from tabletop to units the size of small rooms.

Manufacturers

MILLIPORE CORP, LAB AND HEALTH CARE
THERMO ELECTRON CORP

Models

MILLIPORE CORP, LAB AND HEALTH CARE - RMI3000S9ABA
THERMO ELECTRON CORP - XX631K115

Second Source Parts

Second Source Service

References


See also

Health Risk Evaluation for Carbon Dioxide

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.