BMET Wiki
Advertisement

About[]

Surgical aspirator

Aspirator, surgical are medical devices used for pumping or moving fluids used in the surgery area. These devices typically have an inlet where the fluid enters the pump and an outlet where the fluid comes out. The inlet location is said to be at the suction side of the pump. The outlet location is said to be at the discharge side of the pump. Operation of the pump creates suction (a lower pressure) at the suction side so that fluid can enter the pump through the inlet. Pump operation also causes higher pressure at the discharge side by forcing the fluid out at the outlet. There may be pressure sensing devices at the pump's suction and/or discharge sides which control the operation of the pump. For example, if the suction pressure of a centrifugal pump is too low, a device may trigger the pump to shut off to keep it from running dry; i. e. with no fluid entering.

Under normal conditions of atmospheric pressure suction can draw pure water up to a maximum height of approximately 10.3 m (33.9 feet).

In medicine, suction devices are used to clear airways of materials that would impede breathing or cause infections, to aid in surgery, and for other purposes.

Manufacturers[]

Gomco

Models[]

IM-BFS130 - Gomco

Second Source Parts[]

Second Source Service[]

References[]

Advertisement